MB 20, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011633
KM 7, Neutral, Locknut
Nut, Steel, M 35x1.5
W 16, SKF, Locking washer
Washer, Steel, EAN code: 7316571385600
KMT 24, SKF, Precision Lock nut
Nut, Steel, M 120x2, EAN code: 7316577655103
N 13, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385488
KM 0, SKF, Locknut
Nut, Steel, M 10x0.75, EAN code: 7316571353432
KM 2 Nyloc, Neutral, Locknut
Nut, Steel, M 15x1
KM 5 Nyloc, Neutral, Locknut
Nut, Steel, M 25x1.5
W 07, SKF, Locking washer
Washer, Steel, EAN code: 7316571385525
W 28, SKF, Locking washer
Washer, Steel, EAN code: 7316576676208
MB 13, Neutral, Locking washer
Tab Washer, Steel
KM 28, SKF, Locknut
Nut, Steel, M 140x2, EAN code: 7316577011268
KMFE 11, SKF, Lock nut with integral locking screw
Nut, Steel, M55x2, EAN code: 7316571585192
W 11, SKF, Locking washer
Washer, Steel, EAN code: 7316571385563
KM 29, SKF, Locknut
Nut, Steel, M 145x2, EAN code: 7316577011275
KMK 20, SKF, Lock nut with integral locking screw
Nut, Steel, M 100x2, EAN code: 7316570447637
MB 21, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011640
MB 24, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571498904
N 11, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385686
N 14, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385471
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.