1-17 of 17 products
KM 14, SKF, Locknut
Nut, Steel, M 70x2, EAN code: 7316571770277
Brand | SKF |
---|---|
Mfr Part No. | KM 14 |
KM 13, SKF, Locknut
Nut, Steel, M 65x2, EAN code: 7316571353470
Brand | SKF |
---|---|
Mfr Part No. | KM 13 |
KM 13, Neutral, Locknut
Nut, Steel, M 65x2
Brand | Neutral |
---|---|
Mfr Part No. | KM 13 |
KM 14, Neutral, Locknut
Nut, Steel, M 70x2
Brand | Neutral |
---|---|
Mfr Part No. | KM 14 |
KM 14 Nyloc, Neutral, Locknut
Nut, Steel, M 70x2
Brand | Neutral |
---|---|
Mfr Part No. | KM 14 Nyloc |
KM 13 Nyloc, Neutral, Locknut
Nut, Steel, M 65x2
Brand | Neutral |
---|---|
Mfr Part No. | KM 13 Nyloc |
KM 13, NKE, Locknut
Nut, Steel, M 65x2, EAN code: 9008745720758
Brand | NKE |
---|---|
Mfr Part No. | KM 13 |
KM 14, FAG, Locknut
Nut, Steel, M70x2, EAN code: 4012801174343
Brand | FAG |
---|---|
Mfr Part No. | KM 14 |
ZM30, INA, Precision locknut
Precision locknut, Steel, M30X1, 5, EAN code: 4012802079340
Brand | INA |
---|---|
Mfr Part No. | ZM30 |
KM 13, Timken, Locknut
Nut, Steel, M 65x2, EAN code: 0087796028586
Brand | Timken |
---|---|
Mfr Part No. | KM 13 |
KM 14, Timken, Locknut
Nut, Steel, M 70x2, EAN code: 0013992173089
Brand | Timken |
---|---|
Mfr Part No. | KM 14 |
KM 13, FAG, Locknut
Nut, Steel, M65x2, EAN code: 4012801052511
Brand | FAG |
---|---|
Mfr Part No. | KM 13 |
KM 13, RHP, Locknut
Nut, Steel, M 65x2, EAN code: 00747023116485
Brand | RHP |
---|---|
Mfr Part No. | KM 13 |
KM 14, NKE, Locknut
Nut, Steel, M 70x2, EAN code: 9008745731808
Brand | NKE |
---|---|
Mfr Part No. | KM 14 |
KM 14, RHP, Locknut
Nut, Steel, M 70x2, EAN code: 00747023116492
Brand | RHP |
---|---|
Mfr Part No. | KM 14 |
ZM25, INA, Precision locknut
Precision locknut, Steel, M25X1, 5, EAN code: 4012802079333
Brand | INA |
---|---|
Mfr Part No. | ZM25 |
ZM35, INA, Precision locknut
Precision locknut, Steel, M35X1, 5, EAN code: 4012802079357
Brand | INA |
---|---|
Mfr Part No. | ZM35 |
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.