Close Close
Gates logo

Gates Raw edge cogged v-belts

If you’re looking for a superior belt for your heavy-duty drive, look no further than the Gates Tri-Power® v-belt. With raw edge construction and a notched design, Gates Tri-Power v-belts are ideal for use on small diameter pulleys and back idlers.

Register to buy online
Read more
141-160 of 178 products
141-160 of 178 products
Filter Results

Where makes Gates Tri-Power belts stand out from other raw edge cogged v-belts?

Tri-Power® is Gates’ leading raw edge cogged v-belt. This belt is designed for superior performance on heavy duty drives with even the smallest of pulley diameters.

This belt is constructed from patented ethylene EPDM, allowing Tri-Power to operate in extreme temperatures. This means that Gates Tri-Power is suitable for use in operating temperatures of between -50oC to 120oC, making it ideal for use in harsh environments.

The edge of this belt is machined for even sheave groove contact. This means less slip and better drive efficiency. It also results in smoother running, along with minimised wear.

If you’re considering choosing Gates Tri-Power® raw edge cogged v-belts for use in your application, contact your local sales team today for expert advice and assistance.

Gates Raw edge cogged v-belts FAQs

What is the advantage of a raw edge cogged belt over a standard V-belt?

Raw edge cogged belts offer better grip, higher flexibility, and improved power transmission efficiency, making them ideal for high-speed or high-tension applications.

Can these belts be used in extreme temperatures?

Yes, Gates raw edge cogged V-belts are designed to perform well in a wide range of temperatures, making them suitable for both high-heat and cold environments.

How often should raw edge cogged V-belts be replaced?

Belt replacement intervals depend on the application and operating conditions. Regular inspections are recommended, and the belt should be replaced if signs of wear, cracking, or slippage are observed.

Are raw edge cogged belts compatible with existing V-belt systems?

Yes, Gates raw edge cogged V-belts are available in standard sizes and can be used as direct replacements for standard V-belts in many systems.

Filter Results

Filter

Keywords

Types

Section Width (mm)

  • 13 (67)
  • 17 (73)
  • 22 (38)

Section Height (mm)

  • 8 (67)
  • 11 (73)
  • 14 (38)

Inside Length Li (in)

  • 21 (1)
  • 22 (1)
  • 23 (1)
  • 24 (2)
  • 25 (2)
  • 26 (2)
  • 27 (2)
  • 28 (2)
  • 29 (2)
  • 30 (2)
  • 31 (2)
  • 32 (2)
  • 33 (2)
  • 34 (2)
  • 35 (2)
  • 36 (2)
  • 37 (2)
  • 38 (2)
  • 39 (2)
  • 40 (2)
  • 41 (2)
  • 42 (2)
  • 43 (2)
  • 44 (2)
  • 45 (2)
  • 46 (2)
  • 47 (2)
  • 48 (2)
  • 49 (2)
  • 50 (2)
  • 51 (3)
  • 52 (2)
  • 53 (2)
  • 54 (2)
  • 55 (2)
  • 56 (2)
  • 57 (2)
  • 58 (2)
  • 59 (2)
  • 60 (3)
  • 61 (2)
  • 62 (2)
  • 63 (2)
  • 64 (2)
  • 65 (2)
  • 66 (2)
  • 67 (2)
  • 68 (3)
  • 69 (1)
  • 70 (2)
  • 71 (1)
  • 72 (2)
  • 73 (1)
  • 74 (1)
  • 75 (2)
  • 76 (2)
  • 77 (2)
  • 78 (3)
  • 79 (2)
  • 80 (2)
  • 81 (3)
  • 82 (1)
  • 83 (3)
  • 84 (2)
  • 85 (3)
  • 86 (1)
  • 87 (1)
  • 88 (2)
  • 90 (3)
  • 91 (1)
  • 92 (1)
  • 94 (1)
  • 95 (2)
  • 96 (3)
  • 97 (1)
  • 98 (1)
  • 99 (1)
  • 100 (2)
  • 101 (1)
  • 105 (1)
  • 106 (1)
  • 109 (1)
  • 110 (2)
  • 112 (1)
  • 115 (1)
  • 120 (1)
  • 123 (1)
  • 128 (1)
  • 133 (1)
  • 136 (1)
  • 144 (1)
  • 150 (1)
  • 158 (1)
  • 162 (1)
  • 173 (1)
  • 180 (1)
  • 187 (1)
  • 190 (1)
  • 195 (1)
  • 210 (1)

Section

  • BX (73)
  • AX (67)
  • CX (38)

Material

  • EPDM (178)

Cord Type

  • Polyester (178)