PHG 800-H-075, SKF, Synchronous Imperial Timing Belt - PHG 800-H-075
Imperial, Rubber, Timing belt, EAN code: 07316572594056
PHG 800-H-100, SKF, Synchronous Imperial Timing Belt - PHG 800-H-100
Imperial, Rubber, Timing belt, EAN code: 07316572594063
PHG 800-H-150, SKF, Synchronous Imperial Timing Belt - PHG 800-H-150
Imperial, Rubber, Timing belt, EAN code: 07316572594070
PHG 800-H-300, SKF, Synchronous Imperial Timing Belt - PHG 800-H-300
Imperial, Rubber, Timing belt, EAN code: 07316572594094
PHG 570-H-075, SKF, Synchronous Imperial Timing Belt - PHG 570-H-075
Imperial, Rubber, Timing belt, EAN code: 07316572593561
PHG 570-H-150, SKF, Synchronous Imperial Timing Belt - PHG 570-H-150
Imperial, Rubber, Timing belt, EAN code: 07316572593585
PHG 570-H-200, SKF, Synchronous Imperial Timing Belt - PHG 570-H-200
Imperial, Rubber, Timing belt, EAN code: 07316572593592
PHG 420-H-200, SKF, Synchronous Imperial Timing Belt - PHG 420-H-200
Imperial, Rubber, Timing belt, EAN code: 07316572593226
PHG 420-L-050, SKF, Synchronous Imperial Timing Belt - PHG 420-L-050
Imperial, Rubber, Timing belt, EAN code: 07316572595077
PHG 420-L-075, SKF, Synchronous Imperial Timing Belt - PHG 420-L-075
Imperial, Rubber, Timing belt, EAN code: 07316572595084
PHG 420-L-100, SKF, Synchronous Imperial Timing Belt - PHG 420-L-100
Imperial, Rubber, Timing belt, EAN code: 07316572595091
PHG 600-H-075, SKF, Synchronous Imperial Timing Belt - PHG 600-H-075
Imperial, Rubber, Timing belt, EAN code: 07316572593615
PHG 600-H-100, SKF, Synchronous Imperial Timing Belt - PHG 600-H-100
Imperial, Rubber, Timing belt, EAN code: 07316572593622
PHG 600-H-150, SKF, Synchronous Imperial Timing Belt - PHG 600-H-150
Imperial, Rubber, Timing belt, EAN code: 07316572593639
PHG 600-H-200, SKF, Synchronous Imperial Timing Belt - PHG 600-H-200
Imperial, Rubber, Timing belt, EAN code: 07316572593646
PHG 600-L-050, SKF, Synchronous Imperial Timing Belt - PHG 600-L-050
Imperial, Rubber, Timing belt, EAN code: 07316572595312
PHG 600-L-075, SKF, Synchronous Imperial Timing Belt - PHG 600-L-075
Imperial, Rubber, Timing belt, EAN code: 07316572595329
PHG 600-L-100, SKF, Synchronous Imperial Timing Belt - PHG 600-L-100
Imperial, Rubber, Timing belt, EAN code: 07316572595336
PHG 725-H-100, SKF, Synchronous Imperial Timing Belt - PHG 725-H-100
Imperial, Rubber, Timing belt, EAN code: 07316572729977
PHG 725-H-300, SKF, Synchronous Imperial Timing Belt - PHG 725-H-300
Imperial, Rubber, Timing belt, EAN code: 07316572730003
Common imperial pitches include
-
MXL
-
XL
-
L
-
H
-
XH
-
XXH
Each pitch is designed for specific torque and load capacities, making correct selection essential.
Key Benefits
- Positive drive with zero slippage
- Precise shaft synchronisation
- High efficiency power transmission
- Reduced maintenance compared to chain drives
- Smooth, low-noise operation
- Long service life
Imperial synchronous belts are widely used where consistent positioning and repeatability are critical.
Available Sizes & Specifications
When selecting an imperial timing belt, key factors include:
-
Pitch type (e.g., XL, L, H)
-
Belt length (in inches)
-
Belt width (in inches)
-
Tooth profile
-
Construction material (neoprene, polyurethane)
-
Tensile reinforcement type
If you have an existing belt code, it typically includes pitch and length information for easy identification.
Imperial Timing Belts FAQs
Are imperial and metric timing belts interchangeable?
No. Imperial belts use inch-based pitch measurements, while metric belts use millimetres (e.g., 5M, 8M, 14M). They are not interchangeable, even if they appear similar in size.
How do I identify my imperial timing belt size?
You will need to confirm:
-
Belt pitch (e.g., XL, L, H)
-
Belt length (in inches)
-
Belt width (in inches)
Most belts have a printed code that includes this information. If the marking is worn, measuring tooth pitch and belt length can help determine the correct replacement.
What causes imperial timing belts to fail?
Common causes of failure include:
-
Incorrect belt tension
-
Pulley misalignment
-
Overloading
-
Contamination from oil or debris
-
Mixing metric and imperial components
Routine inspection and proper installation significantly extend belt life.