Close Close

Protorque® Cogged V-Belts

Unlike traditional wrapped belts, Protorque’s cogged (raw-edge molded) V-belts incorporate a notched inner profile. This design enhances flexibility, allowing the belt to operate efficiently on small-diameter pulleys or compact drive layouts.

With thousands of belts spread over 226 different sizes of Protorque cogged classical V-belts held in stock, we can service most requirements with immediate same-day despatch. 

Register to buy online
Read more
301-320 of 345 products
301-320 of 345 products
Filter Results

What are the features of PROTORQUE cogged V-belts?

ProTorque cogged V belts

Raw edge molded cog classical V-belts

If you require longer lasting performance, the PROTORQUE raw edge molded cog classical v-belt could be your answer. Increased belt flexibility low slip, high efficiency and longer service life are just some of the benifits the PROTORQUE molded cog v-belt offers over traditional wrapped v-belts. 

Improved compression whilst the belt is running gives the added bonus of reduced pulley wear. The fibre loaded raw edge cogged profile also improves belt wear and slip resistance.

The PROTORQUE cogged v-belt is ideal for applications where wrapped classical v-belts are likely to reach their performance limits.

Features include:

  • Thinner cogged profile runs effectively on smaller pulley diameters
  • Constant length as per ISO specifications
  • Temperature operating range from -40°C to +70°C
  • Oil, heat and ozone resistant
  • Excellent abrasion and wear resistance
  • Higher coefficient of friction
  • RoHS and REACH compliant

Protorque® Cogged V-Belts FAQs

When should I use cogged V‑belts instead of standard (smooth) V‑belts?

Cogged V‑belts are typically used when:

  • Pulley diameters are relatively small
  • Belt speeds are higher
  • You want reduced belt slip and improved efficiency
  • You need better heat dissipation and potentially longer belt life

They are common on compact industrial, agricultural and horticultural drives.

What are Protorque® cogged V‑belts?

Protorque® cogged V‑belts are V‑belts with moulded cogs (notches) on the inner side. The cogs increase flexibility, reduce bending resistance, and help the belt run cooler, making them ideal for smaller pulley diameters or higher‑speed drives.

Filter Results

Filter

Keywords

Types

Stock

  • Just show products in stock (251)

Section Width (mm)

  • 10 (41)
  • 13 (143)
  • 17 (117)
  • 22 (44)

Section Height (mm)

  • 6 (41)
  • 8 (143)
  • 11 (117)
  • 14 (44)

Inside Length Li (in)

  • 19.1/2 (2)
  • 20 (1)
  • 21.1/2 (1)
  • 22 (1)
  • 23 (4)
  • 24 (4)
  • 25 (6)
  • 25.1/2 (2)
  • 26 (5)
  • 27 (4)
  • 27.1/2 (2)
  • 28 (5)
  • 28.1/2 (2)
  • 29 (3)
  • 29.1/2 (2)
  • 30 (4)
  • 31 (2)
  • 31.1/2 (4)
  • 32 (2)
  • 32.1/2 (2)
  • 33 (5)
  • 33.1/2 (1)
  • 34 (2)
  • 35 (2)
  • 36 (4)
  • 37 (4)
  • 37.1/2 (1)
  • 38 (2)
  • 39 (2)
  • 40 (3)
  • 41 (2)
  • 42 (4)
  • 42.1/2 (2)
  • 43 (4)
  • 44 (4)
  • 45 (4)
  • 46 (2)
  • 46.1/2 (2)
  • 47 (2)
  • 48 (4)
  • 49 (4)
  • 50 (2)
  • 51 (4)
  • 52 (7)
  • 53 (2)
  • 54 (2)
  • 55 (7)
  • 56 (2)
  • 57 (2)
  • 58 (3)
  • 59 (3)
  • 60 (4)
  • 61 (3)
  • 62 (4)
  • 63 (3)
  • 64 (2)
  • 65 (2)
  • 66 (3)
  • 67 (5)
  • 68 (5)
  • 69 (4)
  • 70 (4)
  • 71 (5)
  • 72 (3)
  • 73 (4)
  • 74 (3)
  • 75 (4)
  • 76 (4)
  • 77 (3)
  • 78 (4)
  • 79 (4)
  • 80 (3)
  • 81 (5)
  • 82 (3)
  • 83 (3)
  • 84 (4)
  • 85 (4)
  • 86 (4)
  • 87 (4)
  • 88 (3)
  • 89 (3)
  • 90 (5)
  • 91 (3)
  • 92 (4)
  • 93 (6)
  • 94 (4)
  • 95 (4)
  • 96 (6)
  • 97 (3)
  • 98 (3)
  • 99 (2)
  • 100 (4)
  • 102 (1)
  • 103 (1)
  • 105 (6)
  • 108 (1)
  • 109 (2)
  • 110 (2)
  • 112 (4)
  • 115 (2)

Section

  • AX (143)
  • BX (117)
  • CX (44)
  • ZX (41)

Material

  • EPDM (227)
  • Rubber (118)

Cord Type

  • HMSL (227)
  • Polyester (118)