KM 27, SKF, Locknut
Nut, Steel, M 135x2, EAN code: 7316577011251
KM 29, Neutral, Locknut
Nut, Steel, M 145x2
This item is not currently available from our stocks.
Despatch date information is on request.
KM 31, SKF, Locknut
Nut, Steel, M 155x3, EAN code: 7316577011299
KMFE 12, SKF, Lock nut with integral locking screw
Nut, Steel, M60x2, EAN code: 7316571585307
This item is not currently available from our stocks.
Despatch date information is on request.
KMK 19, SKF, Lock nut with integral locking screw
Nut, Steel, M 95x2, EAN code: 7316571179285
KML 24, SKF, Locknut
Nut, Steel, M 120x2, EAN code: 7316570314472
This item is not currently available from our stocks.
Despatch date information is on request.
KML 28, SKF, Locknut
Nut, Steel, M 140x2, EAN code: 7316571048918
This item is not currently available from our stocks.
Despatch date information is on request.
TW112, Timken, Locking washer
Washer, Steel, EAN code: 0053893822075
TAN19, Timken, Lock nut
Nut, Steel, EAN code: 0053893001371
This item is not currently available from our stocks.
Despatch date information is on request.
ZM25, INA, Precision locknut
Precision locknut, Steel, M25X1, 5, EAN code: 4012802079333
This item is not currently available from our stocks.
Despatch date information is on request.
AN 18, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660429
AN 28, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660498
MB 15, Neutral, Locking washer
Tab Washer, Steel
MB 4, Neutral, Locking washer
Tab Washer, Steel
MB 6, Neutral, Locking washer
Tab Washer, Steel
N 07, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571280707
KMT 20, SKF, Precision Lock nut
Nut, Steel, M 100x2, EAN code: 7316577655080
KMT 8, SKF, Precision Lock nut
Nut, Steel, M 40x1.5, EAN code: 7316577655011
KM 4, Neutral, Locknut
Nut, Steel, M 20x1
KM 40, Neutral, Locknut
Nut, Steel, M 200x3
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.