W 11, SKF, Locking washer
Washer, Steel, EAN code: 7316571385563
KM 18, SKF, Locknut
Nut, Steel, M 90x2, EAN code: 7316577011169
KMK 5, SKF, Lock nut with integral locking screw
Nut, Steel, M 25x1.5, EAN code: 7316571278209
This item is not currently available from our stocks.
Despatch date information is on request.
KMT 8, SKF, Precision Lock nut
Nut, Steel, M 40x1.5, EAN code: 7316577655011
This item is not currently available from our stocks.
Despatch date information is on request.
MB 5, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571066462
N 12, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571280721
KMK 11, SKF, Lock nut with integral locking screw
Nut, Steel, M 55x2, EAN code: 7316577711755
This item is not currently available from our stocks.
Despatch date information is on request.
W 07, SKF, Locking washer
Washer, Steel, EAN code: 7316571385525
KMK 6, SKF, Lock nut with integral locking screw
Nut, Steel, M 30x1.5, EAN code: 7316577711137
MB 13, SKF, Locking washer
Tab Washer, Steel
N 11, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385686
KM 6 Nyloc, Neutral, Locknut
Nut, Steel, M 30x1.5
This item is not currently available from our stocks.
Despatch date information is on request.
KM 13, SKF, Locknut
Nut, Steel, M 65x2, EAN code: 7316571353470
KM 26, SKF, Locknut
Nut, Steel, M 130x2, EAN code: 7316577011244
MB 18, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011619
MB 3, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570545975
KM 15, SKF, Locknut
Nut, Steel, M 75x2, EAN code: 7316571770253
KM 8 Nyloc, Neutral, Locknut
Nut, Steel, M 40x1.5
MB 8, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570517996
MB 22, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011657
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.