TAN19, Timken, Lock nut
Nut, Steel, EAN code: 0053893001371
This item is not currently available from our stocks.
Despatch date information is on request.
TAN21, Timken, Lock nut
Nut, Steel, EAN code: 0053893001470
TW115, Timken, Locking washer
Washer, Steel, EAN code: 0053893821924
This item is not currently available from our stocks.
Despatch date information is on request.
TW116, Timken, Locking washer
Washer, Steel, EAN code: 0053893816753
ZM25, INA, Precision locknut
Precision locknut, Steel, M25X1, 5, EAN code: 4012802079333
This item is not currently available from our stocks.
Despatch date information is on request.
MB 10 A, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571158815
KMT 36, SKF, Precision Lock nut
Nut, Steel, M 180x3, EAN code: 7316577655165
KM 40, Neutral, Locknut
Nut, Steel, M 200x3
HM 3052, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 260x4, EAN code: 7316577010711
HM 48 T, SKF, T lock/dismounting nut
Nut, Steel, Tr 240x4, EAN code: 7316577010643
TAN24, Timken, Lock nut
Nut, Steel, EAN code: 0053893001531
This item is not currently available from our stocks.
Despatch date information is on request.
TW140, Timken, Locking washer
Washer, Steel, EAN code: 0053893821344
MB 11, Neutral, Locking washer
Tab Washer, Steel
MB 17, Neutral, Locking washer
Tab Washer, Steel
MB 30, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011725
MB 6, Neutral, Locking washer
Tab Washer, Steel
KMT 15, SKF, Precision Lock nut
Nut, Steel, M 75x2, EAN code: 7316577655042
KMT 16, SKF, Precision Lock nut
Nut, Steel, M 80x2, EAN code: 7316577655059
KMT 26, SKF, Precision Lock nut
Nut, Steel, M 130x2, EAN code: 7316577655110
KM 15 Nyloc, Neutral, Locknut
Nut, Steel, M 75x2
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.