MB 32, Neutral, Locking washer
Tab Washer, Steel
KM 20, SKF, Locknut
Nut, Steel, M 100x2, EAN code: 7316577011183
KM 7 Nyloc, Neutral, Locknut
Nut, Steel, M 35x1.5
MB 18, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011619
KMK 8, SKF, Lock nut with integral locking screw
Nut, Steel, M 40x1.5, EAN code: 7316570172515
MB 34, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011756
KMT 22, SKF, Precision Lock nut
Nut, Steel, M 110x2, EAN code: 7316577655097
W 09, SKF, Locking washer
Washer, Steel, EAN code: 7316571385549
MB 13, Neutral, Locking washer
Tab Washer, Steel
MB 17, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571770215
KM 2, SKF, Locknut
Nut, Steel, M 15x1, EAN code: 7316577754301
MB 14, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571773728
MB 4, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570803693
KM 19, SKF, Locknut
Nut, Steel, M 95x2, EAN code: 7316577011176
KM 22, SKF, Locknut
Nut, Steel, M 110x2, EAN code: 7316577011206
KM 8 Nyloc, Neutral, Locknut
Nut, Steel, M 40x1.5
N 11, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385686
MB 20, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011633
KMFE 6, SKF, Lock nut with integral locking screw
Nut, Steel, M30x1.5, EAN code: 7316571584782
TN065, Timken, Lock nut
Nut, Steel, EAN code: 0053893002859
This item is not currently available from our stocks.
Despatch date information is on request.
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.