Close Close

Corrosion Inhibitors

Corrosion inhibitors are chemical compounds that, when added to a fluid or gas, significantly reduce the rate of corrosion of metals and alloys. They are widely used in various industries to protect metal surfaces from the damaging effects of corrosion, thereby extending the lifespan of equipment and structures.

Register to buy online
Read more
41-60 of 71 products
41-60 of 71 products
Filter Results

Where are corrosion inhibitor products used?

Corrosion inhibitor greases are used wherever equipment is exposed to water and other harsh environmental conditions. This could be due to arduous outdoor conditions, or frequent high pressure washdowns. 

Industries which use corrosion inhibitor grease include:

Filter Results

Filter

Keywords

Stock

  • Just show products in stock (6)

Brand

  • Molyslip (28)
  • Ambersil (25)
  • ROCOL (10)
  • Loctite (4)
  • Tygris (4)

Pack Size (Per Unit)

  • 400 ml (22)
  • 20Ltr (11)
  • 205Ltr (9)
  • 500 ml (5)
  • 5 Ltr (4)
  • 200 ltr (3)
  • 1000 Ltr (2)
  • 18 kg (2)
  • 20 Ltr (2)
  • 200Ltr (2)
  • 25 ltr (2)
  • 300 ml (2)
  • 180 kg (1)
  • 400 gm (1)
  • 5 ltr (1)
  • Pack of 50 (1)

Food Grade

  • NSF H1 Registered (3)

Other Certifications

  • Halal & Kosher certified (1)

Lower Operating Temperature

  • -20°C (2)

Upper Operating Temperature

  • +110°C (2)
  • -73°C (1)
  • • Use in well ventilated area.
    • Remove any rust and scale with a wire brush. Ensure that the surface to be coated is clean, dry and free from grease.
    • Shake the can vigorously until the agitator ball is free and continue shaking for a further minute.
    • Shake the can periodically during application.
    • Apply in light, even coats - best results are obtained with 2 - 3 light coats rather than one heavy coat.
    • Additional coats can be applied after 15 - 20 minutes.
    • When spraying is finished, clean the aerosol valve by turning the can upside
    down and spray until only propellant escapes.
    • Do not use on the inside of water storage tanks.
    • Remove prior to welding. (1)