Imperial, EPDM, PHG AX40.5EP, EAN code: 07316579570367
| Brand | SKF |
|---|---|
| Mfr Part No. | AX40.5 EP |
| Acorn Code | AX40.5EP-SKF |
| HS Code | 4010 39 00 00 |
| COO | XXX |
Belts provide a very efficient and cost-effective method for transmitting power from prime movers to driven machines. These raw-edge classical V-belts have cogs on their inside to enable the belts to flex around smaller pulleys. Without fabric covering their flanks, raw-edge belts can provide a higher friction and a minimized loss of power through slippage. The EPDM synthetic rubber cushion can significantly increase the life of belt drives when operating at high ambient temperatures.
• Excellent flexibility and high transverse rigidity
• Low elongation during operation
• Oil and heat resistant
• Suitable for tropical climates
• Reduced energy consumption and increased mean time between failures
| Manufacturer Product Code | AX40.5 EP |
|---|---|
| Basic Product Description | Classical raw-edge cogged v-Belt EPDM |
| Measurement | Imperial |
| UOM | Each |
| Inside Length Li (mm) | 1029 |
| Datum Length Ld (mm) | 1059 |
| Section Width (mm) | 13 |
| Section Height (mm) | 9 |
| Inside Length Li (in) | 40.5 |
| Weight (Kg) | 0.0978 |
| Section | AX |
| Material | EPDM |
| Cord Type | Polyester |
| Temperature range | -50'c to +120'c |
| Technical | Excellent flexibility |
| Technical | High transverse rigidity across belt |
| Technical | Offers a long life when operating at high ambient temperatures |
| Basic Reference | PHG AX40.5EP |
| Series | EP |
| EAN | 07316579570367 |