MB 13, SKF, Locking washer
Tab Washer, Steel
MB 16, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571770222
KM 13, SKF, Locknut
Nut, Steel, M 65x2, EAN code: 7316571353470
KM 2, SKF, Locknut
Nut, Steel, M 15x1, EAN code: 7316577754301
KM 32, Neutral, Locknut
Nut, Steel, M 160x3
MB 9, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577758316
W 08, SKF, Locking washer
Washer, Steel, EAN code: 7316571385532
N 08, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571280714
KM 20, SKF, Locknut
Nut, Steel, M 100x2, EAN code: 7316577011183
MB 4, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570803693
N 10, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385495
MB 12, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577758538
W 10, SKF, Locking washer
Washer, Steel, EAN code: 7316571385556
N 12, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571280721
MB 10, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577757449
MB 32, Neutral, Locking washer
Tab Washer, Steel
MB 18, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011619
KM 16, SKF, Locknut
Nut, Steel, M 80x2, EAN code: 7316571770239
KMK 8, SKF, Lock nut with integral locking screw
Nut, Steel, M 40x1.5, EAN code: 7316570172515
This item is not currently available from our stocks.
Despatch date information is on request.
MB 17, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571770215
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.