TN11, Timken, Lock nut
Nut, Steel, EAN code: 0053893000923
KM 1, Timken, Locknut
Nut, Steel, M 12x1, EAN code: 0087796212732
TW111, Timken, Locking washer
Washer, Steel, EAN code: 0053893821917
TN065, Timken, Lock nut
Nut, Steel, EAN code: 0053893002859
TW113, Timken, Locking washer
Washer, Steel, EAN code: 0053893822082
TW122, Timken, Locking washer
Washer, Steel, EAN code: 0053893822136
TAN130, Timken, Lock nut
Nut, Steel, EAN code: 0053893004136
KM 14, Timken, Locknut
Nut, Steel, M 70x2, EAN code: 0013992173089
TW128, Timken, Locking washer
Washer, Steel, EAN code: 0053893822150
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
HML 43 T, Timken, T lock/dismounting nut with metric trapezoidal thread
Nut, Steel, Tr 215x4
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
TW134, Timken, Locking washer
Washer, Steel, EAN code: 0053893822181
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
TW130, Timken, Locking washer
Washer, Steel, EAN code: 0053893822167
TAN128, Timken, Lock nut
Nut, Steel, EAN code: 0053893004075
TAN140, Timken, Lock nut
Nut, Steel, EAN code: 0053893004563
TAN15, Timken, Lock nut
Nut, Steel, EAN code: 0053893001227
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
TN13, Timken, Lock nut
Nut, Steel
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
MB 4, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796213104
What types of locknuts and washers are available from Timken?
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.