This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
TAN130, Timken, Lock nut
Nut, Steel, EAN code: 0053893004136
TAN24, Timken, Lock nut
Nut, Steel, EAN code: 0053893001531
TW119, Timken, Locking washer
Washer, Steel, EAN code: 0053893822112
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
TW120, Timken, Locking washer
Washer, Steel, EAN code: 0053893822129
TW130, Timken, Locking washer
Washer, Steel, EAN code: 0053893822167
TN13, Timken, Lock nut
Nut, Steel
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
MB 15, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028159
MB 20, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028258
MB 22, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028272
MB 5, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028357
MB 7, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028388
MB 8, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028395
KM 5, Timken, Locknut
Nut, Steel, M 25x1.5, EAN code: 0087796028807
KM 9, Timken, Locknut
Nut, Steel, M 45x1.5, EAN code: 0087796028845
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
What types of locknuts and washers are available from Timken?
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.