TW114, Timken, Locking washer
Washer, Steel, EAN code: 0053893822099
TW116, Timken, Locking washer
Washer, Steel, EAN code: 0053893816753
TAN140, Timken, Lock nut
Nut, Steel, EAN code: 0053893004563
TW128, Timken, Locking washer
Washer, Steel, EAN code: 0053893822150
This item is not currently available from our stocks.
Despatch date information is on request.
TAN17, Timken, Lock nut
Nut, Steel, EAN code: 0053893001319
This item is not currently available from our stocks.
Despatch date information is on request.
TW120, Timken, Locking washer
Washer, Steel, EAN code: 0053893822129
TN07, Timken, Lock nut
Nut, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
TN10, Timken, Lock nut
Nut, Steel, EAN code: 0053893000855
This item is not currently available from our stocks.
Despatch date information is on request.
TN12, Timken, Lock nut
Nut, Steel, EAN code: 0053893000978
TW110, Timken, Locking washer
Washer, Steel, EAN code: 0053893821320
MB 5, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028357
This item is not currently available from our stocks.
Despatch date information is on request.
This item is not currently available from our stocks.
Despatch date information is on request.
MB 15, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028159
This item is not currently available from our stocks.
Despatch date information is on request.
KM 1, Timken, Locknut
Nut, Steel, M 12x1, EAN code: 0087796212732
KM 15, Timken, Locknut
Nut, Steel, M 75x2, EAN code: 0087796028609
KML 32, Timken, Locknut
Nut, Steel, M 160x3, EAN code: 0013992156877
This item is not currently available from our stocks.
Despatch date information is on request.
TAN128, Timken, Lock nut
Nut, Steel, EAN code: 0053893004075
What types of locknuts and washers are available from Timken?
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.